100ft 4800PSI High Pressure Power Washer Hose-3/8" Quick Connect Gray

100' x 3/8" Non-Marking 4800psi High Pressure Washer Hose With Quick Couplers Installed - Super Abrasive Resistant Cover For Use With Your Hot or Cold Water High Pressure Washer!

 

Fits All Popular of Hot and Cold Water Pressure Washers:

 

description:  

100ft 4800PSI High Pressure Power Washer Hose-3/8" Quick Connect Gray W/Couplers

100' x 3/8" Non-Marking 4800psi High Pressure Washer Hose With Quick Couplers Installed - Super Abrasive Resistant Cover For Use With Your Hot or Cold Water High Pressure Washer!

 

Fits All Popular of Hot and Cold Water Pressure Washers:

 

description:
 

• Extremely Flexible Grey Non-Marking Cover
• 3/8" Male Thread Solid End X 3/8" Male Thread Swivel End
• Quick Connector Socket & Plug Installed
• 6'' Hose Guards w/ bend restrictors
• Extra steel wire for additional density
• Super Oil Resistant
• Tough Cover for extra protection & durability
• Extremely Flexible Grey Non-Marking Cover
• For Use With Hot Or Cold Water Washers
   

Product Introduction：
 

This high-pressure washer hose is 100 feet long, with a diameter of 3/8 inches, capable of withstanding pressures up to 4800 psi and designed to be non-marking to prevent scratches or marks on surfaces.

 

Instructions for Use：

1. Installation Steps

• Connect the Hose: Connect one end of the hose to the water outlet of the pressure washer and the other end to the nozzle or cleaning tool.
• Ensure Sealing: Check that the connection points are tight to avoid leaks.

2. Operating Steps

• Preparation: Ensure that the power supply and water source of the pressure washer are properly connected, and inspect the hose for any damage.
• Start the Pressure Washer: Open the water valve, then start the pressure washer. Let the machine run for a few minutes to reach optimal operating conditions.
• Select Nozzle: Choose the appropriate nozzle based on your needs (e.g., use a narrow nozzle for heavy-duty cleaning, and a wide fan nozzle for large area coverage).

3. Usage Tips

• Maintain Distance: Keep a distance of 12-24 inches from the surface while cleaning to prevent damage.
• Move Evenly: Maintain a consistent moving speed during cleaning, avoiding staying in one spot for too long.
• Regular Checks: Periodically check the hose for cracks or leaks during operation to ensure safe use.

4. Cleaning and Maintenance

• Post-Cleaning Procedure: After use, drain the water from the hose and rinse it thoroughly to avoid clogging.
• Proper Storage: When storing, coil the hose neatly without folding or pinching, and keep it in a cool, dry place.

5. Precautions

• Temperature Limitations: This hose is designed for hot water, but please do not exceed the safe temperature range (typically not over 200°F).
• Pressure Limitations: Do not exceed the pressure of 6000 psi to avoid damaging the hose.
• Personal Protective Equipment: Always wear safety goggles, gloves, and other necessary protective gear while operating.

 

Frequently Asked Questions

Q: Can this hose be used for cold water cleaning?

A: Yes, although this hose is specifically designed for hot water, it can also be safely used for cold water cleaning.

Q: What should I do if I notice a leak?

A: Check that the connections are tightened; if it still leaks, stop using it and check if the hose is damaged.

Hot Sale:

100ft 4800PSI High Pressure Power Washer Hose-3/8" Quick Connect Gray W/Couplers

100' x 3/8" Non-Marking 4800psi High Pressure Washer Hose With Quick Couplers Installed - Super Abrasive Resistant Cover For Use With Your Hot or Cold Water High Pressure Washer!

 

Fits All Popular of Hot and Cold Water Pressure Washers:

 

description:
 

• Extremely Flexible Grey Non-Marking Cover
• 3/8" Male Thread Solid End X 3/8" Male Thread Swivel End
• Quick Connector Socket & Plug Installed
• 6'' Hose Guards w/ bend restrictors
• Extra steel wire for additional density
• Super Oil Resistant
• Tough Cover for extra protection & durability
• Extremely Flexible Grey Non-Marking Cover
• For Use With Hot Or Cold Water Washers
   

Product Introduction：
 

This high-pressure washer hose is 100 feet long, with a diameter of 3/8 inches, capable of withstanding pressures up to 4800 psi and designed to be non-marking to prevent scratches or marks on surfaces.

 

Instructions for Use：

1. Installation Steps

• Connect the Hose: Connect one end of the hose to the water outlet of the pressure washer and the other end to the nozzle or cleaning tool.
• Ensure Sealing: Check that the connection points are tight to avoid leaks.

2. Operating Steps

• Preparation: Ensure that the power supply and water source of the pressure washer are properly connected, and inspect the hose for any damage.
• Start the Pressure Washer: Open the water valve, then start the pressure washer. Let the machine run for a few minutes to reach optimal operating conditions.
• Select Nozzle: Choose the appropriate nozzle based on your needs (e.g., use a narrow nozzle for heavy-duty cleaning, and a wide fan nozzle for large area coverage).

3. Usage Tips

• Maintain Distance: Keep a distance of 12-24 inches from the surface while cleaning to prevent damage.
• Move Evenly: Maintain a consistent moving speed during cleaning, avoiding staying in one spot for too long.
• Regular Checks: Periodically check the hose for cracks or leaks during operation to ensure safe use.

4. Cleaning and Maintenance

• Post-Cleaning Procedure: After use, drain the water from the hose and rinse it thoroughly to avoid clogging.
• Proper Storage: When storing, coil the hose neatly without folding or pinching, and keep it in a cool, dry place.

5. Precautions

• Temperature Limitations: This hose is designed for hot water, but please do not exceed the safe temperature range (typically not over 200°F).
• Pressure Limitations: Do not exceed the pressure of 6000 psi to avoid damaging the hose.
• Personal Protective Equipment: Always wear safety goggles, gloves, and other necessary protective gear while operating.

 

Frequently Asked Questions

Q: Can this hose be used for cold water cleaning?

A: Yes, although this hose is specifically designed for hot water, it can also be safely used for cold water cleaning.

Q: What should I do if I notice a leak?

A: Check that the connections are tightened; if it still leaks, stop using it and check if the hose is damaged.

Hot Sale:

Item SpecificsBrand :topcn-autopartsMPN :TA17114AT641PSWarranty :1 YearMaximum Pressure :4800 psiHose Diameter :3/8"Item Length :100ftHose Length :100ftColor :GrayType :Cold or Hot Water Pressure WasherStyle :Non-MarkingCustom Bundle :NoCondition :New
Shipping

1. Package handling takes about 2 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.

2.All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-5 business days.
3.Local pick up is not available.
4.Orders to the rest of world may be shipped out from our warehouse in HongKong.
5.International Buyers C Please Note:
a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying. 

Payment

We accept multiple payment methods

Returns

1.We stand behind every product we sell.
2.All of our brand new items come with a 30-Days money-back guarantee.

Customer Services

 Q: How do I pay for my purchase?
A: MY store accepts PayPal. 
Q: When will the item be shipped out?
A: This item will be shipped with 2 business day once payment completed.
Q: Where is my tracking number?
A: Please log on your account, click "my eBay"-->"my summary", or open your email box and find the shipping notification email.
Q: How do I return an item?
A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item. 

Feedback

1. We will leave positive feedback once we get your payment. 
2. If you are dissatisfied for any reason, please do not be quick to leave negative/neutral feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
3. If you are satisfied with the product you received, please leave us positive feedback and 5 scores DSR.

DESCRIPTIONPAYMENTSHIPPINGRETURN POLICYCONTACT US Shop Category Store Home  Ignition Coils  complete struts  Radiator Support  Wheel Hub Bearing  Wheel Adaptor  Oxygen Sensor  Towing mirrors  Fuel pump assembly  Lift supports  Starter  Key or key case  struts  wheel lug nuts  Cylinder Piston Gasket Kit  Cylinder Head Gasket Sets  CV Axle  Door handle  Radiator  fastener  UTV & ATV Brake System Parts ▷  Brake Pads  ♢  Kevlar Carbon Brake Pads  Regulator Rectifier  blower motor fan  blower motor resistor  suspension kit ◈  suspension kits ◈  suspension cj ◈  suspension gxy ◈  suspension fu  AC Compressor  Brake system ◈  Brake Rotors ◈  Brake Pads ◈  Brake Rotors and Pads ◈  Brake Pad Sensor ◈  Brake Drum  Air Suspensions  Nerf Bars & Running Boards  Spark Plugs  Window Switch  Mass Air Flow Sensor-MAF  Window Regulator  Side Fender marker  Alternator  Leveling Lift Kit  Fuel Injector  Coilover  Car Tools  License Plate Frame  Windshield Wiper Motor  Thermostat Housing  Radiator Coolant Tank  Fuel Tank Pipe  Valve Cover  Door Lock Actuator  Power Steering Pump  Variable Timing Solenoid (VVT)  Electric Water Pump  Timing Chain Kits  Timing Belt Kits  Water Pumps  Oil Pump  Tire Pressure Sensor  Throttle Body  Harmonic Balancer  Oil Pan  Motorcycle Carburetor & Parts  Cooling Fan  Cooling Fan Clutch  Hydraulic Lifter&Roller Lifter  Suspension+Strut+Bearing  Head/Fog/Tail Light Assembly  HVAC  ATV Rear Wheel Axle  Parking sensor  Car Antenna  ABS Wheel Speed Sensor  PTO Clutch  Spoilers & Wings  Tensioners  Purge Valve  Knock Sensor  Turbocharger  Crankshaft Position Sensor  Camshaft Position Sensor  MAP Sensor  Oil Pressure Sensor  Throttle Position Sensor  Stator  Catalytic Converter  idle air control valve  Transfer Case Shift Motor  Secondary Air Injection Pump  Running Board Motor  Consoles & Parts  Roof rack  Bumper  Steering Rack  Air Diesel Heater  Engine Mount  Glow Plug  Air Cleaner Filter Box  Cylinder Piston Kit  Jack Stands  Sun Visor  Window Visor  trim tilt motor  ATV Brake Caliper  Air Intake Hose  Cold Air Intake Kit  Horns  Steering U-Joint  Fuel Cell Tank  Height Level Sensor  Temperature Sensor  Driveshaft  Air Ride Suspension Valves  Calipers & Rotors ◈  Calipers & Rotors Pads  Radiator Hose  Ballast module  Rubber Seal Strip  Dipstick  Removal Open Tools  Camshaft & Crankshaft  Rocker Arm  Electric Motor  LED headlight Assembly  Wheel Hub Bearing Knuckle  headlight motorcycle  Foot Rest Pedal  water Pump Impeller  Strut Mount  Splash Guards & Mud Flaps  Heater Cores  Evaporators  vehicle speed sensor  RV Water Pump  Fuel Pressure Regulator  Light Bar Mount Bracket  Sensor-8  CV axle+Brake Pads/Rotors  Steering Shaft  transmission filter  Steering Wheel  Steering Wheel Hub  snorkel air intake  CDI BOX  Spindle  Other Golf Cart Parts  Intercoolers  Crankshaft Pulley  Steering Knuckle  4 pcs wheel hub bearing  Window Weatherstrip Seal  Fender Flares  jumper cable  Tonneau Cover  Bug Shield  Front Bumper Lip  dash cover  primary drive clutch  golf  car seat crevice box  AC Compressor Control Valve+A  Garden Water Pump  Ignition Wires  Lower Kits & Parts  Cargo Cover  Leaf Springs  Shift Knobs & Boots  Hub Caps  fog lights  winch  CV Joint Axle  Power Brake Booster  leveling kit + struts shocks  Wheel Rim  Lights ◈  Side/Cab Marker Lights ◈  Instrument Panel Lights ◈  Third Brake Lights ◈  Interior Lights ◈  Exterior Lights ◈  Led Headlights  flywheel  Air Dryer  steering knuckle-7  Bed Step  Headlight Assembly-II  Trunk Mat  RV Awning Fabric  Trailer Hitch  Coil Springs  Brake System Parts ◈  Brake Calipers ◈  Brake Drums & Brake Shoes ◈  Brake Pads & Brake Shoes  Air Filter  Fuel Vapor Charcoal Canister  A/C Refrigerant Discharge Hose  Steering Wheel Clock Spring  Brake Dust Shield  RV Cover  Leaf Spring Shackle Kit  OtherHot Item Pressure Washer Pump Power Washer Pump 4.0 GPM 1″ Hollow Shaft 4000 PSI New USD 172.21 50ft 4800PSI High Pressure Power Washer Hose -3/8" Quick Connect Gray W/Couplers USD 57.99 Electric PTO Clutch for Cub Cadet 917-05209 WARNER 5219-177 Lawn Mower USD 104.41 3/8" x 50ft 6000psi Hot Water Pressure Washer Hose Non-Marking 2-Braid R2 Black USD 64.36 1 HP Shallow Well Jet Pump Heavy Duty Water Jet Pump w/ Pressure Switch 110V New USD 115.65 New List Item 4Pcs 1/4" NPT 110-120V Air Suspension Valve Solenoid Brass Electric Air N/C USD 39.16 150FT Sewer Jet Hose 1/4'' NPT Sewer Jetter Kit for Pressure Washer 5800PSI New USD 73.33 8Pcs 1/4" NPT 110-120V Air Suspension Valve Solenoid Brass Electric Air N/C USD 68.05 2Pcs 1/4" NPT 110-120V Air Suspension Valve Solenoid Brass Electric Air N/C USD 22.95 1Pcs 1/4" NPT 110-120V Air Suspension Valve Solenoid Brass Electric Air N/C USD 14.80 100ft 4800PSI High Pressure Power Washer Hose-3/8" Quick Connect Gray W/Couplers

100' x 3/8" Non-Marking 4800psi High Pressure Washer Hose With Quick Couplers Installed - Super Abrasive Resistant Cover For Use With Your Hot or Cold Water High Pressure Washer!

 

Fits All Popular of Hot and Cold Water Pressure Washers:

 

description:
 

• Extremely Flexible Grey Non-Marking Cover
• 3/8" Male Thread Solid End X 3/8" Male Thread Swivel End
• Quick Connector Socket & Plug Installed
• 6'' Hose Guards w/ bend restrictors
• Extra steel wire for additional density
• Super Oil Resistant
• Tough Cover for extra protection & durability
• Extremely Flexible Grey Non-Marking Cover
• For Use With Hot Or Cold Water Washers
   

Product Introduction：
 

This high-pressure washer hose is 100 feet long, with a diameter of 3/8 inches, capable of withstanding pressures up to 4800 psi and designed to be non-marking to prevent scratches or marks on surfaces.

 

Instructions for Use：

1. Installation Steps

• Connect the Hose: Connect one end of the hose to the water outlet of the pressure washer and the other end to the nozzle or cleaning tool.
• Ensure Sealing: Check that the connection points are tight to avoid leaks.

2. Operating Steps

• Preparation: Ensure that the power supply and water source of the pressure washer are properly connected, and inspect the hose for any damage.
• Start the Pressure Washer: Open the water valve, then start the pressure washer. Let the machine run for a few minutes to reach optimal operating conditions.
• Select Nozzle: Choose the appropriate nozzle based on your needs (e.g., use a narrow nozzle for heavy-duty cleaning, and a wide fan nozzle for large area coverage).

3. Usage Tips

• Maintain Distance: Keep a distance of 12-24 inches from the surface while cleaning to prevent damage.
• Move Evenly: Maintain a consistent moving speed during cleaning, avoiding staying in one spot for too long.
• Regular Checks: Periodically check the hose for cracks or leaks during operation to ensure safe use.

4. Cleaning and Maintenance

• Post-Cleaning Procedure: After use, drain the water from the hose and rinse it thoroughly to avoid clogging.
• Proper Storage: When storing, coil the hose neatly without folding or pinching, and keep it in a cool, dry place.

5. Precautions

• Temperature Limitations: This hose is designed for hot water, but please do not exceed the safe temperature range (typically not over 200°F).
• Pressure Limitations: Do not exceed the pressure of 6000 psi to avoid damaging the hose.
• Personal Protective Equipment: Always wear safety goggles, gloves, and other necessary protective gear while operating.

 

Frequently Asked Questions

Q: Can this hose be used for cold water cleaning?

A: Yes, although this hose is specifically designed for hot water, it can also be safely used for cold water cleaning.

Q: What should I do if I notice a leak?

A: Check that the connections are tightened; if it still leaks, stop using it and check if the hose is damaged.

Hot Sale:

Item SpecificsBrand :topcn-autopartsMPN :TA17114AT641PSWarranty :1 YearMaximum Pressure :4800 psiHose Diameter :3/8"Item Length :100ftHose Length :100ftColor :GrayType :Cold or Hot Water Pressure WasherStyle :Non-MarkingCustom Bundle :NoCondition :New

ShippingPaymentReturnsCustomer ServicesFeedback

1. Package handling takes about 2 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.

2.All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-5 business days.
3.Local pick up is not available.
4.Orders to the rest of world may be shipped out from our warehouse in HongKong.
5.International Buyers C Please Note:
a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying. 

We accept multiple payment methods

1.We stand behind every product we sell.
2.All of our brand new items come with a 30-Days money-back guarantee.

 Q: How do I pay for my purchase?
A: MY store accepts PayPal. 
Q: When will the item be shipped out?
A: This item will be shipped with 2 business day once payment completed.
Q: Where is my tracking number?
A: Please log on your account, click "my eBay"-->"my summary", or open your email box and find the shipping notification email.
Q: How do I return an item?
A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item. 

1. We will leave positive feedback once we get your payment. 
2. If you are dissatisfied for any reason, please do not be quick to leave negative/neutral feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
3. If you are satisfied with the product you received, please leave us positive feedback and 5 scores DSR.

Copyright of Topcn-autoparts. All rights reserved.